Acquisition Of Software Development Environment; How To Get - Epson S1C31 Setup Manual

2. Acquisition of Software Development Environment

2. Acquisition of Software Development Environment
This chapter describes how to obtain our recommended software development environment required for software
development.

2.1 How to Get

The user can use the third-party ARM
and Debug Probe) to development the software for the S1C31 Family.
Table 2.1.1 shows the recommended development Environment for S1C31 Family. Please contact the tool
vendors or the tool vendor's distributors to obtain these tools.
Type
PC
Integrated Development Environment
(IDE)
Debugging Probe
Please prepare either one of IDEs and either one of debug probes in Table 2.1.1. However, please note that some
combinations of IDE and debug probe can not be used as shown in Table 2.1.2.
IAR Embedded Workbench for ARM
(IAR EWARM)
MDK-ARM
Furthermore, by using the software and evaluation board provided by us, users can start software development
smoothly. Table 2.1.3 shows the software development environment provided by us.
Name
S1C31 Setup Tool package*1
S1C31xxx Peripheral circuit sample
software package*1
S5U1C31xxxTx*2 (SVT Board)
*1: Please download from the Seiko Epson microcontroller web site.
*2: Please contact your local distributor or sales office.
2
® development Environment (Integrated Development Environment /IDE
Table 2.1.1 Development Environment Needed
PC with Windows 10
IAR Embedded Workbench for ARM
(by IAR Systems)
MDK-ARM with uVision5 (by ARM)
I-jet (by IAR Systems)
J-Link (by SEGGER)
Table 2.1.2 Available Combinations of IDE and Debug Probe
I-jet
Available
Not available
Table 2.1.3 Tools Provided by Seiko Epson
Files required for software development environment.
(Flash loader, configuration files (.svd, etc.), etc.)
Peripheral circuit library and sample software.
S1C31xxx Evaluation Board.
Seiko Epson Corporation
Name
J-Link
Available
Available
Contents
S1C31 Family Software Development
Remarks
-
Please prepare either one.
Please prepare either one.
Setup Guide (Rev.4.0)