Operating Environment - Epson S5U1C17001H2 User Manual

Firmware (FW)
version as shipped
Flash programming
voltage supply
Flash programming
voltage supply to V
pp
pin
Supported target
system I/O voltage
Target system power
supply
Flash programming
power supply cable
(with black connector)
*1: Supported from S1C17 firmware Ver3.0 and S1C33 firmware Ver1.4 onward.
1.2

Operating Environment

As the host computer, the S5U1C17001H uses a PC with a USB port (USB 1.1) available.
For details concerning operating systems, refer to "Operating Environment" in the S5U1C17001C Manual.
S5U1C17001H2 User Manual
(ICDmini Ver2.0) (Rev2.0)
Table 1.1.2 Differences between S5U1C17001H Products
S5U1C17001H1100
(ICDmini Ver1.0)
S1C17 FW Ver1.0 or S1C17
FW Ver1.1
S1C33 FW not supported
Fixed 7.0 V voltage (max. 30
mA) output with S1C17
processor selected
Fixed 7.0 V voltage (max. 30
mA) output with S1C33
processor selected
Not supported
3.3 V, 1.8 V, or voltage input
from target (1.0 V to 5.0 V)
Not available
Not available
Seiko Epson Corporation
S5U1C17001H1200
(ICDmini Ver1.1)
S1C17 FW Ver1.1
S1C33 FW not supported
Fixed 7.0 V voltage (max. 30
mA) output with S1C17
processor selected
Fixed 7.0 V voltage (max. 30
mA) output with S1C33
processor selected
Not supported
3.3 V, 1.8 V, or voltage input
from target (1.0 V to 5.5 V)
Not available
Not available
1. Overview
S5U1C17001H2100
(ICDmini Ver2.0)
S1C17 FW Ver3.2
S1C33 FW Ver1.5
Variable 6.0 V to 8.0 V
voltage (max. 100 mA)
output with S1C17
*1
processor selected
Fixed 7.0 V voltage (max. 30
mA) output with S1C33
*1
processor selected
Supported
3.3 V, 1.8 V, or voltage input
from target (1.0 V to 5.5 V)
3.3 V (max. 100 mA) output
pin
1.8 V (max. 100 mA) output
pin
Available
3