Current Demand - GE Multilin 745 Instruction Manual

S4 Elements

Current Demand

! CURRENT DEMAND
GE Multilin
PATH: SETPOINTS !" S4 ELEMENTS
[!] W1 CURRENT DEMAND
FUNCTION: Disabled
W1 CURRENT DEMAND
MESSAGE
TARGET: Self-Reset
W1 CURRENT DEMAND
MESSAGE
PICKUP:
W1 CURRENT DEMAND
MESSAGE
BLOCK: Disabled
This section contains the settings to configure the current demand monitoring
elements. Included are a current demand level for each winding and each phase.
FIGURE 5–43: Current Demand Scheme Logic
http://www.GEindustrial.com/multilin
Transformer Management Relay
!" CURRENT DEMAND ! W1(3) CURRENT DEMAND
Range: Enabled, Disabled
Range: Self-Reset, Latched, None
Range: 0 to 65000 in steps of 1 (auto-
ranging)
100 A
Range: Logc Inpt 1 to 16, Virt Inpt 1 to
16, Output Rly 2 to 8, SelfTest
Rly, Vir Outpt 1 to 5, Disabled
745
5–83