Revision Codes; Calibration; Target And Flash Messages; Target Messages - GE Multilin 745 Instruction Manual

Transformer management relay
Table of Contents

Advertisement

Target and Flash Messages

Revision Codes

Calibration

Target Messages

GE Multilin
PATH: ACTUAL VALUES
!"
A4 PRODUCT INFO
! REVISION
[!]
CODES
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
Hardware and software revision codes are shown here.
PATH: ACTUAL VALUES
!"
A4 PRODUCT INFO
! CALIBRATION
[!]
MESSAGE
The initial and most recent calibration dates are shown here.
Target and Flash Messages
Target messages are displayed when any protection, monitoring or self-test target is
activated. The messages contain information about the type of the active target(s),
and are displayed in a queue that is independent of both the setpoint and actual
value message structures.
When any target is active, the Message LED will turn on, and the first message in
the queue is displayed automatically. The target message queue may be scrolled
through by pressing the MESSAGE % and MESSAGE & keys. If no key is pressed, the
next target message in the queue will be displayed after a delay of four seconds.
This process repeats, continuously cycling through the queue of target messages.
As long as there is at least one message in the queue, the Message LED will remain
lit. Pressing any key other than MESSAGE % or MESSAGE & will return the display to the
setpoint or actual value message that was previously displayed. The MESSAGE % and
MESSAGE & keys may be pressed any time the Message LED is lit to re-display the
target message queue.
If MESSAGE % or MESSAGE & is pressed when no target messages are in the queue, all
front-panel LEDs will light and the following flash message will appear:
NO CONDITIONS ARE
CURRENTLY ACTIVE
http://www.GEindustrial.com/multilin
Transformer Management Relay
!"
REVISION CODES
!! 745 Transformer
!! Management Relay
HARDWARE REVISION:
F
SOFTWARE REVISION:
270
BOOTWARE REVISION:
131
VERSION NUMBER:
000
INSTALLED OPTIONS:
W3-P1-G1-LO-ALR
SERIAL NUMBER:
D33xxxxx
MANUFACTURE DATE:
Jan 01 2001
!"
CALIBRATION
ORIGINAL CALBIRATION
DATE: Jan 01 2001
LAST CALIBRATION
DATE: Jan 01 2001
745
6–17

Advertisement

Table of Contents
loading

Table of Contents