Security - Nexcom AIEdge-X 300 User Manual

Chapter 4: BIOS Setup

Security

Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Main Advanced Chipset Security
Password Description
If ONLY the Administrator's password is set,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the User's password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
in the following range:
Minimum length 3
Maximum length 20
Administrator Password
User Password
►
Secure Boot
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Administrator Password
Select this to reconfigure the administrator's password.
User Password
Select this to reconfigure the user's password.
Copyright © 2020 NEXCOM International Co., Ltd. All Rights Reserved.
Boot Save & Exit
Set Administrator Password
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Secure Boot
Aptio Setup Utility - Copyright (C) 2020 American Megatrends, Inc.
Chipset
System Mode
Secure Boot
Secure Boot Mode
►
Restore Factory Keys
►
Reset To Setup Mode
►
Key Management
Version 2.20.1275. Copyright (C) 2020 American Megatrends, Inc.
Secure Boot
Select this to enable or disable Secure Boot. Secure Boot only works when
the system runs in user mode.
Secure Boot Mode
Select this to configure the Secure Boot mode.
Standard Fixed secure boot policy.
Custom Secure boot policy variables can be configured by a
physically present user without full authentication.
59
Security
Setup Secure Boot feature is Active
if Secure Boot is Enabled,
Platform Key(PK) is enrolled
[Disabled]
and the System is in User mode.
Not Active
The mode change requires
platform reset
[Custom]
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
AIEdge-X ® 300 User Manual