Appendix 2 Parameter Values - Labnet MultiGene Mini Operation Manual

Item Parameter
1 Temp(ºC)
2 Time
3 Ramp(C/S)
4 +Temp
5 +Time
Cycle1
×00
6
From 00
to 00
7 Grad.
8 Date
9 Time
10 Default File
11 Default User
12 Control Mode
13 Sample Volume
14 Hotlid Temp
15 Block Temp
16 Key Beep
17 Run End Beep

APPENDIX 2 Parameter Values

Scale
Temp. Control point
Time of Temp.
Control（mm:ss）
Ramping Rate
（ºC/Second）
Temp. Gain of Every
Cycler
Time Gain of Every
Cycler（mm:ss）
Section Numbers
Cycler Numbers from
beginning to the end
The start segment of
the section
The end segment of
the section.
Gradient Temp.
Difference（ ）
Date(YY-MM-DD)
Time(HH:MM:SS)
The default file name
The default user
name
Control Mode
Sample Volume（ul）
State of Hotlid: OFF
State of Hotlid:
Open（ ）
State of Block Temp
during the heating of
Hotlid（ºC）
Key Sound (ON or
OFF)
Run End Sound (ON
or OFF)
Range
4.0~99.0
--:--
（set the value before
"："through "Function"
key.）
00：00~59：59
0.1 ~5.0
#.#
0.0~9.9
0:00~9:59
1~5
1~99
X（and existed segment
no.）
≤ X+15
0 ~30
00（~99）-01（~12）-
01（~31）
00:00:00~23:59:59
Max. length is 11
characters.
Max. length is 11
characters.
Block
Tube
10~200
OFF
30~99
0~99
OFF/ON
OFF/ON
18
Note
The time of Temp. control is
infinite, meanwhile, the hotlid
turned off.
Maximum of Ramping Rate
Cycle1：×00 From 00 to 00
year-month-date
hour：minute：second
Under this mode
reaching target temperature
namely entering into
thermostable state), the time
for reagent's temperature
under target temperature is
less than setting time (see Fig.
1).
Under this mode
entering into the thermostable
state after reaching
temperature and decreasing
about 3°C), reagent's
temperature can be close to
target temperature very fast
(see Fig. 2).
Humming
Humming continuously
(once
the
(once
target