Labnet MultiGene Mini Operation Manual page 12

File
File Saving Screen
In this screen use the keypad to enter
the file name. Press "Enter" to move
the cursor down one position. Select
User and File Name through the pop-
up character selection box. Click left
button to delete characters while
clicking right button to move the
cursor. Press the "Caps" key to shift
from a capital to lowercase letter, and
on the top left a capital or small letter
indication will appear. (example: abc)
Press "Main" to go back to the

main interface.
Press "Save" to save the file. When the file is normally saved, "File has been

saved. Please continue another operation" will appear. Press "Enter" to close
the reminder window. If the file name was already in use, the system will
display（Rename）or continue to save (Save).
If the current Control Mode is Block mode, press "Run" to enter the file running

interface; if the current Control Mode is Tube mode, pressing "Run" will open, a
dialog box to input the sample volume.
section 1
Cycle1 ×** From ** to **
section 2
Cycle2 ×** From ** to **
· · ·
section 5
Cycle5 ×** From ** to **
Relation of cycle and segments in a file
Please enter sample volume:
Hotlid=off
File Save Interface
abc
User：
File Name：
Password：
Password confirm：*****
Main Caps
050µl
10
Seg. 1
Seg. 2
· · ·
Seg. 16
2009-07-28 10:05:00
LabnetI I
1 1
***** *
*
Save Run n