Labnet MultiGene Mini Operation Manual page 13

Enter the sample volume. Press "Back" to go back to the file save menu. Press
"Run" to start running the file.
In the file save menu, if you press "Run" without pressing "Save", the system will
display "The modifications will be lost
after running. Do you still want to
run?"
Press "No" to go back file save

interface.
Press "Yes" to enter the file

running menu and sample volume
input screen.
modification
saved after the program is run.
When the file is running,
Running•••" will continuously flash.
When the protocol is complete, "File
running is over is displayed, Press
'Enter' to return to the main menu."
 Press "Stop" and "Do you want
to stop running?"
displayed. Select 'F1'or 'F3'".You
can then select either "Stop" or
"Start".
 Press "Pause" and the display
will show "Pause state now.
Press 'F3' to continue running."
You can then select "Start" to
continue.
 Press "View File" to view the file in the editing format.
Note: the file cannot be edited while running
 Press "Skip" to stop current temperature segment and run the next segment.
(Note: the
here cannot be
"Now
will be
Hotlid=off
abc
User：
File Name：
Password：
Password confirm：Num1
File running interface
Hotlid=off
100
75
50
25
0
Temp 1c 95.0 2c 55.0
Time 1:00 02:00
File Name:Num1
User: Labnet
1c Temp=00.0 Time=00:00 Cycle 01 of 10
Total Time: 00h 56m
Stop Pause
11
2007-07-28 10:05:00
Labnet i
Num1 1
Num1 1
1
No
2007-11-1 10:05:00
3c 72.0 4 04.0
01:45 00:00
Now Running •••
Remaining Time:00h 56m
Start Skip View File
Yes s