Advertisement
Quick Links
c.LOGiC-Interface
C2-C25
Compatible with navigation systems
Mercedes Benz
Comand 2.5
Product features
• full plug and play multimedia interface
• 2 AV-inputs with separate IR-control channel
• control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, ...
• after-market rear-view camera input activation
• automatic switching to rear-view camera input (only from interface mode)
• rear-view camera power (+12V max. 1A)
• Rear-seat-entertainment video-output for Video-sources connected to the c.LOGiC
• power on remote out trigger signal (+12V max. 1A) to switch on connected devices
• video-in-motion
Version 08.12.2015
C2-C25
Advertisement
Related Manuals for Caraudio-Systems c.LOGiC C2
Summary of Contents for Caraudio-Systems c.LOGiC C2
- Page 1 c.LOGiC-Interface C2-C25 Compatible with navigation systems Mercedes Benz Comand 2.5 Product features • full plug and play multimedia interface • 2 AV-inputs with separate IR-control channel • control of after-market devices, e.g. DVB-T tuner, DVD-player, DVD-changer, … • after-market rear-view camera input activation •...
- Page 2 Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the dip switches of the Interface-box C2C-M200 1.3.1. Automatic switching to rear-view camera 1.3.2. Deactivating c.LOGiC AV2-input 2. Connection schema 3. Installation 3.1. Connections to the Comand 3.2.
- Page 3 Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades.
- Page 4 1.2. Check compatibility of vehicle and accessories Requirements Vehicle CL-class (C215) til 08/2002, S-class (W220) til 08/2002 Navigation Comand 2.5 Limitations Factory-TV-tuner Must NOT be installed. After-market rear-view cam Automatic switching to camera only works from c.LOGiC mode 1.3. Setting the dip switches of the Interface-box C2C-M200 The default dip switch settings of the Interface-box need to be changed ONLY if an after-market rear-view camera shall be connected or if the AV2...
- Page 5 2. Connection schema 3. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead.
- Page 6 3.1. Connections to the Comand Place of installation is behind the Comand. Remove the head-unit from the dash-board. If female 8pin C1 connector of factory harness exists, transfer pins from female 8pin C1 connector of C2C-MB25 to corresponding slots of female 8pin C1 connector of factory harness.
- Page 7 3.2. Interconnecting Interface-box and harnesses Plug harness C2C-MB25 into 14pin Molex of Interface-box C2C-M200. Plug female 18pin AMP-connector of C2C-MB25 into male 18pin AMP-socket of Interface-box C2C-M200. 3.3. Connecting peripheral devices It is possible to connect up to 2 after-market AV-sources, after-market rear-view camera and rear-seat-entertainment to the c.LOGiC-Interface.
- Page 8 3.3.1. AV-source(s) The c.LOGiC has the possibility to connect and remotely control by navigation buttons two pre-programmed devices. The device list in the device control table (appendix A) shows the pre-programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device.
- Page 9 3.3.2. Installing AV-source’s IR-sensor additionally Additionally to the control via OEM navigation, it is possible to install the original IR-sensor of a connected device. By using the respective Y-adapter (e.g. STA-Y35MM or STA-RJ12) for the IR-Port of the connected device, the controls of navigation AND device’s IR-sensor can be connected and used simultaneously.
- Page 10 3.3.4. After-market rear-seat-entertainment Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector VIDEO OUT of Interface-box C2C-M200. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seat-entertainment monitors.
- Page 11 4.4. Assigning device controls After selecting the c.LOGiC as current AV source, longpress the number “1”-button or shortpress the “RET”-button. The display in the instruments will show “TV 1” and “RC01”. Turn right knob until the device-related IR-code for AV1 as described in device control table (appendix A) is reached.
- Page 12 Button assignment table c.LOGiC Comand 2.5 COMAND DVB-T USB-LiNK DVD-player DVD- iPod®-control Analog-tuner button changer SCAN POWER PLAY PLAY PLAY/PAUSE SCAN ↑ ↑ ↑ ↑ ↑ VOL + EXIT STOP STOP POWER ← ← ← ← ← CH - 4 long DISPLAY VOL- DISPLAY...
- Page 13 -30°C to +80°C Weight 202g Measurements (box only) B x H x T 90 x 30 x 105 mm 6. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@caraudio-systems.de Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ®...
Need help?
Do you have a question about the c.LOGiC C2 and is the answer not in the manual?
Questions and answers