Table of Contents
Advertisement
Repair
To prevent skin injection and splashing, never open a
camlock hose or applicator fitting while there is pres-
sure in the fluid line. Perform Pressure Relief Proce-
dure, page 10, before performing any repair
procedure.
The material and equipment may be hot. To avoid
burns, do not touch hot fluid or equipment. Wait until
equipment has cooled completely before performing
any repair procedure.
Xtreme Lower Removal
Required Tools
•
Set of adjustable wrenches
•
Torque wrench
•
Rubber mallet
•
Thread lubricant
•
Anti-seize lubricant
•
Thread sealant
333208F
Disconnect and Reconnect
Lower
1. Flush pump; see Prime/Flush, page 11. Stop pump
at bottom of its stroke.
2. Perform Pressure Relief Procedure, page 10.
3. Disconnect unit from power source.
4. Disconnect fluid hose. Disconnect suction hose.
Hold fluid inlet fitting with a wrench to keep it from
loosening while you disconnect suction hose.
Do not lift the pump by the lift ring when the weight
exceeds 250 kg (550 lb). The lift ring could fail and
result in personal injury or damage to the equipment.
Use caution when disconnecting lower; they can
weigh up to 25 kg (55 lbs). Take appropriate
precautions.
5. If driver does not require service, leave it attached
to its mounting.
Repair
19
Advertisement
Table of Contents
