AudioCodes Mediant 1000 Hardware Installation Manual page 70

And e-sbc

Hide thumbs Also See for Mediant 1000:

Table of Contents

CHAPTER 6 Hardware Maintenance

Click OK to confirm removal; after a few seconds, the module is software-removed, the

port status icons of the module turn gray and the name of the module is suffixed with

the word "Reserved":

Unplug all the cables from the module.

Physically remove the module from the slot:

Locate the two captive screws securing the module to the chassis:

Using a flathead screwdriver or your fingers, loosen the two captive screws.

Firmly grip the two captive screws and extract the module from the slot by pulling the

captive screw:

Physically insert the new module into the same slot:

Figure 6-8:

Software-Removed Module

Figure 6-9:

Captive Screws on Module

Figure 6-10: Extracting Module from Slot

- 62 -

Mediant 1000 Gateway & E-SBC | Hardware Installation Manual

Table of Contents