AudioCodes Mediant 1000 Hardware Installation Manual page 43

CHAPTER 5 Cabling the Device
Figure 5-2:
●
●
Ethernet port interface cabling must be routed only indoors and must not exit the
building.
(French) Avertissement: Le câblage de l'interface du port Ethernet doit être acheminé
uniquement en intérieur et ne doit pas sortir du bâtiment.
Cabling specifications:
■ Cable: Category 5e or Category 6 shielded twisted pair (STP) straight-through
Connector: RJ-45
■
■ Connector Pinouts:
Default Ethernet Groups and Web Interface String Names
The SWX module is a separate orderable item.
If your SWX module has different port labels (i.e., roman numerals) compared to
those shown in the previous figure, see Ports Description for the corresponding
port numbering.
Figure 5-3: RJ-45 Connector Pinouts for LAN
Mediant 1000 Gateway & E-SBC | Hardware Installation Manual
- 35 -