CHAPTER 3 Physical Description
Color
Green
Red
BRI Module
The BRI module provides the Integrated Services Digital Network (ISDN), Basic Rate Interface
(BRI) interfaces. Up to five BRI modules can be installed in the device. Each BRI module can
provide up to four BRI line interfaces and therefore, the device can support up to 20 BRI
interfaces (i.e., 5 modules x 4 ports).
Ports Description
Each BRI module provides up to four analog RJ-45 ports. The ports are labeled I, II, III, and IIII.
LED Description
Each BRI port provides a LED indicating operating status, as described in the following table:
Color
Green
Table 3-4: FXO Module LED Description
State
On
Off-hooks the line toward the PBX.
Blinking
Detects a ring signal from the PBX.
On
Error - malfunction in line or out of service due to Serial Peripheral
Interface (SPI) failure.
Figure 3-4:
Table 3-5: BRI Module LED Description
State
On
Physical layer (Layer 1) is synchronized (normal operation).
Mediant 1000 Gateway & E-SBC | Hardware Installation Manual
Description
BRI Module
Description
- 7 -