Safety; Signal Words & Safetya; Notations; Equipment Safety Guidelines - Kioti WD1260 Operator's Manual

S W & S
IGNAL ORDS AFETY
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
OBEY THIS MESSAGE!
Attention!! The above SAFETY ALERT SYMBOL is
used throughout this manual to bring attention to
important safety instructions. For your safety and the
safety of others, these instructions must be followed or
SERIOUS INJURY OR DEATH MAY RESULT.
The signal words: DANGER, WARNING, and
CAUTION are used with important safety messages in
this manual. DANGER identifies the most serious
hazards.
The machine safety labels shown in this section are
placed in important areas on your machine to draw
attention to potential safety hazards.
DANGER – IMMINENTLY HAZARDOUS
SITUATION!!! WILL RESULT in severe personal
injury or death if not avoided.
For functional purposes, some machine components
cannot be guarded. The operator must exercise
extreme care when dealing with these potential
hazards.
WARNING – POTENTIALLY HAZARDOUS
SITUATION! If not avoid, COULD RESULT in death or
serious injury. WARNING is also used to warn you of
unsafe practices.
CAUTION – POTENTIALLY HAZARDOUS
SITUATION! If not avoided, MAY RESULT in minor or
moderate injury. It may also be used to alert against
unsafe practices.
Pay close attention to sections of text marked with the
above words. If any meanings are unclear, or if you
have any questions, please contact Wisconsin
Engineering or an authorized service center for
clarification.

5. SAFETY

A

LERTS

N
OTATIONS
NOTE: General reference and helpful information for
proper operation and maintenance practices.
IMPORTANT: Specific procedures or information
required to prevent damage to the machine or an
attachment.
E S
QUIPMENT AFETY
Safe operation is a major concern when operating any
machine or piece of equipment. As many safety
features as possible have been designed and built into
your machine. This does not guarantee that accidents
cannot happen. Safe operation is the responsibility of
the operator. For your safety, as well as those around
you, study, understand, and follow the safety
precautions in this section.
Safe operation begins with a safety
minded operator. For your safety, as well
as those around you, this machine must
be operated in accordance with the safety
precautions given in this manual.
Review safety precautions with all users at least once
per year. All users should read carefully read through
and understand the safety precautions presented in
this text.
NEVER operate the machine beyond its ability, and
never operate where you, the operator, feel it may be
unsafe. Never exceed the limits of a piece of
machinery. If the ability to do a job SAFELY is
uncertain – DO NOT OPERATE!
NEVER allow children or persons unfamiliar with the
equipment or this manual to operate this machinery.
This is dangerous and can lead to an accident.
It is the responsibility of the customer to ensure this
equipment will be operated in accordance with all local
and state authorities. This equipment is not intended
for use on public roads. When operating or
transporting the mower, make sure all applicable local
laws and regulations are followed.
Never operate a machine beyond its ability or for uses
other than described in this manual. Uses other than
those identified in this manual may void your warranty.
S S
AFETY HIELDS AND
Safe operation requires that you become familiar with
the signs, and the danger represented by each.
The safety decals provided on your equipment serve
as visual deterrents to unsafe, dangerous practices.
Never tamper with safety decals on the equipment.
Replace any decals that are not readable or missing.
Never paint over, remove, or deface any safety decals
on this machine. Contact your dealer for replacement
decals.
G
UIDELINES
L
ABELS
9