Main Features - Clover USB01PT User Manual

Pan/Tilt Network Camera

Main features

Built-in Web Server & Web interface
It has built-in Web Server that transmits image and sound data in real-time through the
network, and without any additional program, an access to the server via Web browser such
as MS Explorer is available.
High Speed/Wide Range Pan & Tilt Motion
It monitors with adjusting speed in 10 stages and a rotating range of 320° horizontally, 105°
vertically. Therefore no blind spot occurs.
Higher Frame Rate & Lower File size
By compressing image data transmitted by H 263 codec, it generates transmission speed of 25
frame per second (SIF standard) or higher.
Bilateral sound communication
Sound codec of G.723.1 is used and bilateral sound communication is possible.
H.323 internet video phone
It is possible images and voice via H323 Internet video phone and view images at different
angles. ( Only the Internet video phone specified by the company should be used)
External Camera can usage Network Camera
Connecting CCTV camera with an external camera makes an additional network camera.
Flash Memory for Firmware update
It is convenient to upgrade built-in software of camera to the latest version through web
browser.
Multi-Viewer Software & Multi-User Connection
It monitors and controls four network cameras at the same time and up to 15 persons can get
an access to a camera at the same time. (The number of persons on-line at any time can vary in
future).
Alarm I/O and function of Motion Detection
When operating external sensor, it controls external ON/OFF device as it moves in preset
positions and transmits recorded images through registered E-mail. Also motion detection can
function as external sensor.
DDNS Server Support
Registering Service from our DDNS server when the camera is equipped in mobile IP
environment entitles each camera with a domain name and allows to be used as fixed IP.
10 Position Preset & Auto Patrol
10 Camera position and alarm output condition can be preset and it auto-patrols repeatedly
following specified positions in order.
- 6 - User's Guide