Table of Contents
Advertisement
5. Put Ceiling Plate Hole of camera and 4 latches of Ceiling
Plate in line and fixed them by pushing in the direction
of arrow as shown in the right diagram
6. Put Rear Cover as shown in the left diagram and push down and towards into camera in the
direction of arrow on the right diagram. Latches of rear cover are put into holes of camera and
fixed up.
Rear Cover
7. When the set-up is completed, camera is fixed onto
ceiling plate as shown in the diagram.
8. Bundle the cables that are put through the ceiling together using clamp
filter. It is advised by certificate authority according to test result of
electromagnetic radiation.
Rear cover must be attached to camera; otherwise camera can fall off while
moving
Pan/Tilt Network Camera
Latch
Clamp Filter for EMC
- 55 -
User's Guide
Advertisement
Table of Contents
