Table of Contents
Advertisement
The above setup and all router setup hereafter only apply when TCP/IP of camera is
setup as below.
IP Address: 192.168.10.51
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.10.1
Web Server Port: 2051, Video Server Port: 3051
4. Reenet (RX-3400 Plus)
A.
Set-up procedure
i.
Router connection
1. Type http://192.168.1.254 in the Internet Explorer address window
ii.
Change of Router IP setup ( it must be the same as Gateway of camera)
1. Select [Local Port]
2. Change the initial setup value (192.168.1.254) of router IP to 192.168.1.1
3. Select the checkbox "Do not distribute IP Address to local computers" of DHCP
server.
4. Check the changed setup by reconnecting (http://192.168.10.1) to router
iii.
Port forwarding and virtual server
1. Select [By Port]
2. Port Number: 2051
3. Local Server IP Address: 192.168.1.51
4. Click [Add]
5. Add Port Number: 3051 by repeating step 1-4.
5. Repotec (RP-IP2014)
A. Set-up procedure
i.
Router connection
1. Enter http://192.168.1.254 in the Internet Explorer address window
2. Connection ID : router, Password: admin
ii.
Change of Router IP setup ( it must be the same as Gateway of camera)
1. Change the initial setup value (192.168.1.254) of router IP to 192.168.1.1
2. Check the changed setup by reconnecting (http://192.168.10.1) to router
iii.
Port forwarding and virtual server
1. [Advanced Setup]-[Virtual Server]
2. Select [By port]
3. Port Number: enter 2051
4. Local Server IP Address: enter 192.168.10.51
5. Click [Add]
6. Add Port Number: 3051 by repeating step 2-5
Pan/Tilt Network Camera
- 62 -
User's Guide
Advertisement
Table of Contents
