Table of Contents
Advertisement
Setting up camera IP using temporary IP address
Change Internet Protocol (TCP/IP) of PC to connect into camera as following.
IP Address: 192.168.1.11
Sub Net Mask: 255.255.255.0
Gateway: 192.168.1.1
1.
For Windows 98
A. Double click on Start-> set-up-> control-> network
B.
After click "TCP/IP" in network window, click [register] button.
C. After selecting (IP address), enter network information as shown on the diagram to
[allocated IP address use].
D. Select (gateway) after entering "192.168.1.1".
E.
Click (OK) button
F.
If IP setting is changed, it re-sets Windows composition and can request for Windows98 CD.
After insert CD in CD-ROM drive, click [OK] button. file copy is done , re-boot computer
2.
For Windows 2000/XP
A. Click start-> setting -> control-> network and
phone connection-> local area connection
B.
Click (Properties)
Pan/Tilt Network Camera
- 17 -
User's Guide
Advertisement
Table of Contents
