Table of Contents
Advertisement
[Ref 6] Name and function of Alarm I/O Module
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1. Name and functional description
(Top)
Action Input
Alarm Input (1, 2)
A. The top
i.
Action Input: it turns ON/OFF the power of Alarm I/O
ii.
Alarm Input (1,2): two pairs of input terminals connect sensors.
iii.
Alarm Output (1,2): two pairs of output terminals connect ON/OFF devices (lamps,
sirens and etc)
B.
The side
i.
RJ-11 Port: it connects cables provided to I/O Port of camera.
ii.
Power LED: red indicator lights when connected to camera
iii.
Out LED (1, 2): it indicates two Alarm Output conditions. According to the action of
Alarm Output (relay ON/OFF), yellow indicator turns on/off.
iv.
In LED (1, 2): it indicates two Alarm Input conditions. Green indicator turns on/off
according to the action of connected sensors
<bottom>
Alarm Output (1, 2)
ON
OFF
Pan/Tilt Network Camera
(Side)
RJ-11 Port
Power LED
Entrance Delay
Exit Delay
Action Input
- 67 -
In LED (1, 2)
Out LED (1, 2)
ON
OFF
Invert #2
Invert #1
User's Guide
Advertisement
Table of Contents
