Table of Contents
Advertisement
8. Add Port Number: 3051 by repeating step 2-7
12. SMC (SMC7004VBR)
A. Set-up procedure
i.
Router connection
1. Enter http://192.168.2.1. in the Internet Explorer address window.
2. System Password: smcadmin
ii.
Change of Router IP setup ( it must be the same as Gateway of camera)
1. [LAN]
2. Change the initial setup value (192.168.2.1) of router IP to 192.168.10.1
3. Check the changed setup by reconnecting (http://192.168.10.1) to router
iii.
Port forwarding and virtual server
1. [NAT]-[Virtual Server]
2. IP Address: enter 51
3. Ports: 2051
4. Data Type: choose TCP
5. Check Enable
6. Add Port Number: 3051 by repeating step 2-5.
Pan/Tilt Network Camera
- 66 -
User's Guide
Advertisement
Table of Contents
