Clover USB01PT User Manual page 25

iii. Subnet mask: 255.255.255.0 (Follow IP router's setting)
iv. Default Gateway: 192.168.1.1 ( enter intra-connection IP Address of IP router)
v. Primary DNS Server: enter DNS Server of internet service provider
vi. Web Server Port(TCP): 2051 ( it is recommended to add 2000 to the end number of IP
Address and you can assign other port of number 1025 ~ 65535)
vii. Video Server Port(TCP): 3051 (it is recommended to add 3000 to the end number of IP
Address and you can assign other port of number 1025 ~ 10000)
2. Port-forwarding set-up of IP Router
Network that has one public IP address constructs local network that has many private IP
address using ordinary IP Router. when appliances with private IP address communicate
with the outside IP Router of this network structures changes private IP address to public
IP address and then connects with the outside (this function is called NAT (Network
Address Translation)Also, to be used as a server, appliances with private IP address must
use port forwarding function of IP Router. Port forwarding is a function to deliver a
request (internal Port) that enters to specific port from the outside to appliances (PC,
network camera) with internal private IP address.
It is a [port forwarding] setting table of high-quality function of router
No. Service Protocol
1 TCP
2 TCP
Refer to text Page 61 ~ 67 "[reference 5] router models by different manufacturers and
port forwarding setting method".
After changing web server port, enter by following method to connect to camera
Port no. 80 :
2051 Port no. 2051 :
Service Port
2051
3051
http://192.168.1.51 or
http://192.168.1.51:2051
- 22 -
Pan/Tilt Network Camera
Internal Port Internal IP Address
2051
3051
http://192.168.1.51:80
192.168.1.51
192.168.1.51
User's Guide