Table of Contents
Advertisement
D. After completing camera setting normally,
success message window is created as shown in the
diagram when click [Apply] button click Confirm]
and finish setting.
E.
Error message is displayed as follows in case it is set up by IP that exists in local area
network then you need to set up again.
4. Connect to Camera
A. Enter camera IP address in Internet
Explorer's address input space.
B.
Download
automatically.
C. Active X Control capacity is about 1.8M
so that downloading can take a some
time depending on network state
D. If security certification window rises,
click [yes (Y)].
You must retry booting the camera if failed in setting in 5 minutes after booting.
If security certification window does not rise after connection to camera, confirm
whether Internet Explorer's tool> internet option> security items are set up in
[normal].
Active
X
Control
Pan/Tilt Network Camera
- 16 -
User's Guide
Advertisement
Table of Contents
