Table of Contents
Advertisement
2. DDNS
A. Enable/Disable: Choose Enable or Disable.
B.
Dynamic DNS Setting
i.
Default: Dynamic DNS server of CLOVER ELECTRONICS U.S.A
ii.
Other
1. When using other Dynamic DNS server, enter domain name of IP Address (limit to 20
characters in alphabet )
2. When entering domain name, DNS of TCP/IP must be set up correctly.
3. Common Dynamic DNS server cannot be used as a result of exclusive communication
protocol between DDNS server and camera.
C. Synchronize with Dynamic DNS time
i.
When camera is rebooted, it synchronizes with local time of where camera is set up since
the time is initialized to 01/01/2000, 00:00:00
Auto-rebooting function runs when it is set up as follows
-
When registered in SecuIP Service(DDNS)
-
When Auto-Reboot Flag is set (available only for Static IP)
Click [Apply] to reboot camera after DDNS setup
Refer text page 66-67 "(Ref 6) Use of SecuIP Service (DDNS) for detailed method on
the use of Dynamic DNS server of CLOVER ELECTRONICS U.S.A
Pan/Tilt Network Camera
- 42 -
User's Guide
Advertisement
Table of Contents
