[Ref 4] Firmware Update method
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
When updating Firmware web browser under the Internet Explorer 5.0 (SP2)
may not work normally. So it is recommended to use Internet Explorer 5.5 and
over.
Do not close window in the process of Firmware Update..
Do not disconnect network or turn off power in the process of Firmware Update
1. Connect to [Admin Tools] of camera.
Factory default value of administrator's
account is set up with User Name: admin,
Password: pass. Enter them and click [OK]
2. [Click [Firmware Update] of [System] from
menu on the left side of [Admin Tools] page.
3. Click [Start Update], and then firmware update window pops up as shown below. Click
[찾아보기] and attach downloaded file(*.cmp).
Pan/Tilt Network Camera
- 57 -
User's Guide