Table of Contents
Advertisement
To enter camera information (Server Manager)
Use when you wish to connect by entering camera information manually not using Auto-Login
function. Also, you can use when connecting 4 cameras at once in Multi-Views.
1. Group
: Click 'Group' as shown on the right diagram.
A. +: Make a new group
B.
–: Delete selected group. (The basic group 'General'
cannot be deleted)
C. Edit: Edit name of a group
D. Connect: When click [Connect] after selecting a group in
4 CH Views, It Connects 4 cameras (Server) of high
position that belong to selected group in order. (group
connection function)
E.
Automatically generated group
i. General: Basic group name
ii. History: The Group that keeps previous camera information
4. Server
: Click Server item
A. +: Add a new camera
i. Server Name: Make a name for new camera and
enter
ii.
Server IP: Enter IP Address and Video Server Port.
(Ex) 192.168.1.2:4333
iii.
User ID: Enter User ID of camera.
iv.
User Password: Enter Password of camera.
B. -: Delete selected camera
C. Edit: Edit information of camera
D. Connect: Connect selected camera
E. Automatically generated camera (Server)
i.
None: No registered camera
ii.
My Camera: Automatically registered name for Auto-Login
Pan/Tilt Network Camera
- 31 -
User's Guide
Advertisement
Table of Contents
