Clover USB01PT User Manual page 43

Pan/tilt all-in-one new network camera
Table of Contents

Advertisement

3. File Size is determined by video quality and check the speed of network upload referring
to this.
It is set in High by manufacturer.
iii. Brightness: It controls the brightness of image. . (Default: 5)
iv. Contrast: it controls definition of image. (Default: 2)
2. Audio
A. Enable/Disable
i.
Set up in (Enable) when using Audio function. (Default)
B.
MIC.
i.
Select
1. Internal: Use built-in microphone of camera
2. External: It can be used when external microphone is installed to Audio-In of camera.
ii.
Volume
1. Volume of microphone can be adjusted in 4 steps
2. Higher the level, louder the sound becomes, and noise increases at the same time. So
choose adequately.
C. Speaker
i.
Setting: It is recommended to Set up in [ON] after speaker is installed to Audio Out of
camera.
ii.
Volume
1. Volume of speaker can be adjusted in 4 steps
2. Higher the level, louder the sound becomes.
File Size/Frame
- 40 -
Pan/Tilt Network Camera
Bit stream Size/Sec
User's Guide

Advertisement

Table of Contents
loading

Related Products for Clover USB01PT

Table of Contents