powersoft DigiMod 500 User Manual page 2

CAUTION:
To reduce the risk of electric shock, do not remove the cover. No user-
serviceable parts inside. Refer servicing to qualified service personnel.
WARNING:
To prevent fire or electric shock, do not expose this equipment to rain or
moisture.
SAFEGUARDS:
Electrical energy can perform many useful functions. This unit has been
engineered and manufactured to assure your personal safety. Improper use can result in
potential electrical shock or fire hazards. In order not to defeat the safeguards, observe the
following instructions for its installation, use and servicing.
This equipment is a Professional Audio Amplifier module, it has been tested and found comply with
the limits for a Class A digital device, pursuant to part 15 of the FCC rules and to the product family
standards for audio professional use:
2014/35/EU Low Voltage Directive
2014/30/EU EMC Directive
2011/65/EU RoHS Directive
For more details, please refer to Powersoft website.
This equipment may introduce harmonics components higher than IEC 61000-3-2 Class A limits
when connected to the supply mains.
It is the responsibility of the installer or user of the equipment to inform and ask for, by consultation
with the distribution network operator if necessary, the permission to connect this equipment to the
low voltage supply (see clause 4 of IEC 61000-3-2).
Warning Notices
Location
Install the amplifier in a ventilated enclosure (IP20 at least), where it will not be directly exposed to high
temperature or humidity.
Do not install the amplifier in a location that is exposed to direct rays of the sun, or near to hot appliances or
radiators. Excessive heat can adversely affect the operation and internal components. Installation of the
module in a damp or dusty environment may result in malfunction or accident.
Precautions regarding installation
Placing and using the amplifier for long periods on heat-generation sources will affect performances. Avoid
placing the amplifier on heat-generating sources. Install this amplifier as far as possible from tuners and TV
sets. An amplifier installed in close proximity to such equipment may cause noise or degradation of the
picture.
Powersoft s.r.l.
07/11/07
DigiMod 500/1000/1500/2000HV/1000NPS
RISK OF ELECTRIC SHOCK
IMPORTANT SAFETY INSTRUCTIONS!
! Read these instructions !
! Keep these instructions !
! Heed all warnings !
! Follow all instructions !
- P. IVA n. 04644200489 – Via E.Conti, 5 Scandicci - Tel.: (+39) 055 7350230- Fax: 055 7356235
CAUTION
DO NOT OPEN
Caution
!
2