ClearCube R1200 User Manual page 24

20 • ClearCube Architecture and Product Overview
shows the last three digits of the blade serial number as a default. ClearCube Sentral
software can be used to program as many as 10 alphanumeric characters into the
display. Figure 1 shows the R series PC blades.
Figure 1 R Series PC Blades
A display area at the front of each blade provides active status indicators. The four
LEDs on the front panel of the blade are described in Table 1 and shown in Figure 2.
LED Color
Blade is powered on.
Green
Power
Blade is powered off.
Off
C/Port is connected, and link is good.
Green
C/Port
C/Port is not connected, or link is bad.
Red
Flashing indicates hard drive activity.
Green
Disk
No hard drive activity.
Off
Model R1300: 1000 Mb/s link — flashing indicates activity.
Green
Model R2200: 10/100/1000 Mb/s link — flashing indicates activity.
Model R1300: 10/100 Mb/s link — flashing indicates activity.
E-Net Yellow/
Model R2200: Not applicable.
Amber
No link.
Off
Table 1 Blade LED Functions
R Series Data Center Products User's Guide, Rev. B
Description