ClearCube R1200 User Manual page 12

8 • Introduction
• IT Power Systems – ClearCube equipment has been evaluated and found to be
compatible with IT power distribution systems with a phase-to-phase voltage not
to exceed 240 V.
• Live Circuits – Operating personnel and service personnel must not remove
protective covers when operating the ClearCube chassis. Adjustments and
service to internal components must be undertaken by qualified service
technicians. During any service of this product other than replacing a PC blade or
externally accessible modules on the chassis, the main connector to the premise
wiring must be disconnected. Dangerous voltages may be present under certain
conditions. Use extreme caution.
• Explosive Atmosphere – Do not operate the chassis in conditions where
flammable gases are present. Under such conditions this equipment is unsafe
and may ignite the gases or gas fumes.
• Part Replacement – Only service equipment with parts that are exact replacements,
both electrically and mechanically. Contact ClearCube Technology for replacement
part information. Installation of parts that are not direct replacements will void the
warranty and may cause harm to personnel operating the chassis. Furthermore,
damage or fire may occur if replacement parts are unsuitable.
• Modification – Do not modify any part of the C/Port, chassis, or PC blade from its
original condition. Modifications may result in hazards.
• Laser Safety – The Fiber Transceiver and the Fiber C/Port have been evaluated
and certified to an EN 60825-1 – Safety of laser products. Refer to Appendix B for
more details.
CAUTION: Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
ClearCube Technology products that use lasers display the following graphic on the
rating label:
Marked devices comply with the FDA code of Federal 21 CFR 1040 per Notice 50
and/or the Canadian Radiation Emitting Devices Act REDR C1370.
R Series Data Center Products User's Guide, Rev. B