Terminal Server Ports; Aco Switch; Craft Port; Table 4-5. Terminal Server Port Pin List - ADTRAN MX410 System Manual

Front Panel

Terminal Server Ports

The four Terminal Server port RS-232 interfaces located on the front panel are used to
remotely connect to RS-232 managed devices.
The 8-pin modular Terminal Server Port 1-4 jacks should never be
connected to a telecommunications network and are intended for
connection to RS-232 data interfaces only.
The Terminal Server ports are accessed by establishing a Telnet session to the MX410/MX412
with the TCP Port Number of the particular port. The pin assignments for each of the RS-232
interfaces are listed in

ACO Switch

The Alarm Cutoff (
ACO
relays. Pressing the ACO Switch acknowledges alarms.

Craft Port

The DB-9 (RS-232)
CRAFT
VT100 terminal or VT100 terminal emulation software such as HyperTerminal or ProComm
Plus.
4-8 PRELIMINARY
CAUTION
Table 4-5.

Table 4-5. Terminal Server Port Pin List

Pin Function
1 GND
2 No Connect
3 TXD
4 No Connect
5 RXD
6 No Connect
7 No Connect
8 No Connect
) Switch turns off audible and visual alarms connected to the alarm
port is used to login and provision the MX410/MX412 through a
MX410/MX412 System Manual
61189500L1-1B