Menu Descriptions
Test Menu
The Test menu (see
Active Alarms: CRITICAL MAJOR
Selection :
The Test menu options are shown in
Option
Description
DS1 Ports (1-4 on MX410 and 1-12 on MX412)
1-4
#1 - #4
5
Reset ALL Tests
6
Loopback Timeout
5-42 PRELIMINARY
Figure
5-26) provides options for testing the DS1 Ports.
1 - #1 : Pattern
2 - #2 : Data mode
3 - #3 : Data mode
4 - #4 : Data mode
5 - Reset ALL Tests
6 - Loopback Timeout:
Figure 5-26. Test Menu
Table
Table 5-22. Test Menu Options
Function
This option is used to invokes the
43.
This option is used to stop all DS1 port testing and resets all DS1
ports to Data Mode.
This option is used to set the loopback timeout value. The default
value is 120 Minutes and the possible values are as follows:
• 120 Minutes
•
90 Minutes
•
60 Minutes
•
30 Minutes
•
15 Minutes
•
10 Minutes
•
5 Minutes
•
Disabled
MX410
ID:
Test
DS1 Ports
120 Minutes
'?' - System Help Screen
5-22.
MX410/MX412 System Manual
MM/DD/YY HH:MM
MX410
"DS1 (Port #) Menu"
on page 5-
61189500L1-1B