ADTRAN MX410 System Manual page 14

Product Overview
The major features of the MX410/MX412 are as follows:
• 19-inch wall mounting or rack mounting, one rack unit high
• Front panel data connections
• One V.35 port
• Four RJ-45 long-haul DS1 connections (12 on the MX412) with outside plant protection
• A four-port Ethernet switch
• Non-Blocking DS0 cross connect between all DS1 interfaces and the V.35 port
• RJ-45 10Base-T Ethernet connection
• Terminal server functionality
• FXS port (MX412 only)
• DB-9 craft interface for access to Provisioning, Status, Test, and Alarm menus
• Management via Telnet over Ethernet connection or VT100 through a local RS-232, DB-9,
craft port
• End-to-end Ethernet extension over multiple T1s
• Robbed Bit Signaling (RBS) supported on a per DS0 basis
• Hot-swappable PSUs with 1:1 redundancy (MX410 only)
• Independent power feeds with separate returns
• Accepts redundant ±60 to ±22 VDC inputs
• Wire-wrap pins for alarms
• Manual and remote initiated loopback modes
• Meets NEBS Level 3
• Comprehensive test features
1-2 PRELIMINARY
MX410/MX412 System Manual
61189500L1-1B