Operator Safety; Emergency Stop - UNITY LAUNDRY SYSTEMS UTS40 User Manual

SAFETY INFORMATION
0.4

OPERATOR SAFETY

The following maintenance checks must be performed daily:
1. Verify that all warning labels are present and legible, replace as necessary.
2. Check door interlock before starting operation of the machine:
a. Attempt to start the machine with the door open. The machine should not start.
b. Close the door without locking it and start the machine. The machine should not start.
c. Attempt to open the door while a cycle is in progress. The door should not open.
If the door lock and interlock are not functioning properly disconnect power and call a service technician.
3. Do not attempt to operate the machine if any of the following conditions are present:
a. The door does not remain securely locked during the entire cycle.
b. Excessively high-water level is evident.
c. Machine is not connected to a properly grounded circuit.
Do not bypass any safety devices in the machine.
0.5 EMERGENCY STOP - ON-PREMISE MODEL ONLY
Device features
• To be located in a visible place, separated from all machines and easily accessible.
• To break the electrical supply for all machines.
• To safely isolate all machines at maximum consumption.
• To need reinstating (the whole installation) after the emergency stop push-button has been released.
®/™ ©2021 Unity Laundry Systems. All rights reserved.
WARNING
NEVER insert hands or objects into basket until it has completely
stopped. Doing so could result in serious injury.
WARNING
Operating the machine with severe out-of-balance loads could result
in personal injury and serious equipment damage.
WARNING
In accordance with safety requirements for industrial machinery
standard ISO 10472-1,5-2) and other safety requirements, the laundry
owner/manager is responsible for installing an emergency stop
device that affects all the machines in the laundry.
Part. 14000001 Rev. 04//2021 9