Table of Contents
Advertisement
USB INTERFACE
12.2 COPY PROGRAM (FORMULA) FROM USB FLASH DRIVE TO WASHER
Press [UP] or [DOWN] button to select "2:ProgFromUSB" and press [ENTER] button.
Press [ENTER] button to confirm. This operation will upload all of the formulas from USB FLASH DRIVE to controller.
Press [ESC] button to cancel.
Note: The file path of parameter on USB FLASH DRIVE should be: "H:\LDXXX\PARAMETER"."H" is the U stick
recognized on the personal computer.
12.3 COPY PARAMETER FROM WASHER TO USB FLASH DRIVE
Press [UP] or [DOWN] button to select "3:CopyParaToUSB" and press [ENTER] button.
Press [ENTER] button to confirm. This operation will upload all of the parameters from controller to USB FLASH DRIVE.
Press [ESC] button to cancel.
Note: The parameters will be reserved under the file path: "H:\LDXXX\PARAMETER". The existing parameters under
this file path will be covered by this one.
12.4 COPY PROGRAM (FORMULA) FROM WASHER TO USB FLASH DRIVE
Press [UP] or [DOWN] button to select "4:CopyProgToUSB" and press [ENTER] button.
Press [ENTER] button to confirm. This operation will download all of the formulas from controller to USB FLASH DRIVE.
Press [ESC] button to cancel.
Note: The formulas will be reserved under the file path: "H:\LDXXX\PARAMETER". The existing formulas under this
file path will be covered by this one.
36
Part. 14000001 Rev. 04//2021
WelcometoUSB
2:ProgFromUSB
<Enter>=Confirm
WelcometoUSB
3:CopyParaToUSB
<Enter>=Confirm
WelcometoUSB
4:CopyProgToUSB
<Enter>=Confirm
®/™ ©2021 Unity Laundry Systems. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UTS40 and is the answer not in the manual?
Questions and answers
door pin error no 6
Door Pin Error No. 6 for UNITY LAUNDRY SYSTEMS UTS40 means there is an issue with the door pin or the lock release cord. It is recommended to check these components to resolve the error.
This answer is automatically generated