Edit A Wash Program; Saving A Wash Program - UNITY LAUNDRY SYSTEMS UTS40 User Manual

PROGRAMING
10.2

EDIT A WASH PROGRAM

To select your desired step, press [Up] and [Down] and press [Enter].
To delete or add a cycle step, press [Up] and [Down] button at the same time to enter the add or delete wash step.
Press [Up)] button to add one step in front of the selected step.
Press [Down] button to delete the selected step.
Press [Enter] button to enter the step edit interface.
10.3

SAVING A WASH PROGRAM

Press the [Esc] button under "program" status, LCD displays the information and will confirm whether to save the program.
Save the program by pressing [Enter] button. To exit without saving by pressing [Esc] button.
32
Part. 14000001 Rev. 04//2021
Sel & Edit Step
St01:PreW.
↑ ↓
St02:MainW.
< + >AddSubStp
↑ ↓
< >Add < >Sub Select Step Type
Null Rinse Tumb
PreW Drain
MainW.
Extract Extract
®/™ ©2021 Unity Laundry Systems. All rights reserved.