Table of Contents
Advertisement
COIN MECHANISM - VENDED MODEL ONLY
13.6
EXAMPLE OF CHANGING THE COIN VALUE
To change the coin value from 5 to 10 on Channel 2 (c2).
1. Enter the setting mode.
2. Use "+" to search for "Cn" and press "Ent" to confirm.
3. The display will show "c1," use "+" and stop at "c2." Press "Ent" to confirm.
4. The original coin value "5" will be shown, use "+" to increase and stop at "10."
5. Press "Esc" to exit to "Cn" and repress "Esc" to return to the setting mode.
13.7
EXAMPLE OF CHANGING THE TOLERANCE
To change t3 on Channel 2 (c2) from 5 to 7:
1. Enter the setting mode.
2. Use "+" to search for "tL" and stop at it. Press "Ent" to confirm.
3. The display will show "c1", use "+" and stop at "c2", press enter to confirm
4. Navigate to "t3" by using "+" and press "Ent" to confirm. The display will appear the original tolerance "5."
5. Use "+" to increase the tolerance to "7" and press "Ent" to confirm.
6. Press "Esc" for 3 times to return to the setting mode.
Note: Increase tolerance when the coin acceptance is low and decrease it to reject off forgery.
13.8
EXAMPLE OF DELETING THE PREDEFINED SETTING
To delete Channel 3:
1. Enter the setting mode.
2. Navigate to "dL" by using "+" and press "Ent" to confirm.
3. Use "+" to search for "c3" and then press "Ent" to confirm.
4. Select "01" to delete predefined setting and press "Ent" to confirm.
5. Press "Esc" to exit.
13.9
UNDERSTANDING COIN VALUE / PRICE VS PULSE OUTPUT
The VN-5 coin acceptor is designed to enhance its versatility to cater to different types of systems, and thus suitable for
worldwide applications.
To receive correct pulse output with each coin inserted, the accuracy of Coin Value/ Price vs Pulse Output setting is crucial.
Insertion of sufficient Coin Value or correct piece of coins that is equivalent to the Price will trigger the coin acceptor to
deliver a pulse. Extra Coin Value being paid will be stored in the coin acceptor memory as a remainder for later coin value
accumulation
COIN VALUE / PRICE = Number of PULSE
Remainder is kept in coin acceptor memory. Example 1: Most common scenario
®/™ ©2021 Unity Laundry Systems. All rights reserved.
Part. 14000001 Rev. 04//2021
43
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UTS40 and is the answer not in the manual?
Questions and answers
door pin error no 6
Door Pin Error No. 6 for UNITY LAUNDRY SYSTEMS UTS40 means there is an issue with the door pin or the lock release cord. It is recommended to check these components to resolve the error.
This answer is automatically generated