Table of Contents
Advertisement
USB INTERFACE
Note: The PUNP VFD parameters will be reserved under the file path: "H:\LDXXX\PARAMETER".The existing PUNP
inverter parameters under this file path will be replaced by this one.
The VFD installed on the machine should be made by PUNP and the parameter VFD type should be set as "PUNP".
12.8
ALARM INFORMATION AND TOUBLE SHOOTING FOR USB OPERATION
ALARM NAME
E1: Please insert the USB
E2: Please copy the file
E3: Please check the file
E4: File read-write error
E5: FLASH error
E6: Backboard commu err
E7: Invt commu err
E8: Invt model not match
38
Part. 14000001 Rev. 04//2021
TROUBLE SHOOTING
Please insert the USB FLASH DRIVE again
Please check path.
Please check whether file exists or not
Please check the file.
Please contact Unity at 1-800-484-3013
Please check the file.
Please contact Unity at 1-800-484-3013
Please contact Unity at 1-800-484-3013
Please check Lines of Communication and power on again
Please contact Unity at 1-800-484-3013
®/™ ©2021 Unity Laundry Systems. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UTS40 and is the answer not in the manual?
Questions and answers
door pin error no 6
Door Pin Error No. 6 for UNITY LAUNDRY SYSTEMS UTS40 means there is an issue with the door pin or the lock release cord. It is recommended to check these components to resolve the error.
This answer is automatically generated