Usage Statistics; Statistics; Check Statistics Data - UNITY LAUNDRY SYSTEMS UTS40 User Manual

USAGE STATISTICS

6.0 STATISTICS

Use the Statistics menu to check the cycle count of the machine.
Esc Enter
Note: the key function as shown in the figure.
The hot, warm, cold and start buttons are used to navigate the washer menus.
Hot (1) - Up Arrow
Warm (2) - Down Arrow
Cold (3) - Escape
Start - Enter
On initial power up, the machine is in countdown mode for 10 seconds. During the countdown, press [Up]+[Down] to enter
the "Function Menu". Then select "Statistics", and press the key [Enter] and then enter the password to enter the "Statistics"
menu.
The default password is ↓ ↓ ↓ ↓ ↓ ↓ ↓ ↓. (warm warm warm warm warm warm warm warm) (2 2 2 2 2 2 2 2)
Default maintenance password: ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ (hot hot hot hot hot hot hot hot) (1 1 1 1 1 1 1 1)
6.1 CHECK RECORD DATA
Press [Enter] for 3 seconds to clear the data and set the cycle count to 0.
Default maintenance password: ↑ ↑ ↑ ↑ ↑ ↑ ↑ ↑ (hot hot hot hot hot hot hot hot) (1 1 1 1 1 1 1 1)
®/™ ©2021 Unity Laundry Systems. All rights reserved.
Function Menu
Statistics
Program Price
<Esc>3S=Quit
1:Record Data
1:TotRunCounts
Now 0
<Enter>3S=Clear
Load items in washer and close door
1
Cargue los artículos en la lavadora y cierre la puerta
Select wash cycle
2
Seleccione el ciclo de lavado
PROGRAMMABLE CYCLES
Press start button
Ciclos Programables 3
Presione el botón de arranque
1 2 3
START
Arranque
Statistics
1:Record Data
2:Modi.ClrPw
<Esc>3S=Quit
INSTRUCTIONS
Instrucciones
Part. 14000001 Rev. 04//2021 27