Table of Contents
Advertisement
WASHER POWER UP
5.0
STARTUP
After power is turned on, the LCD shows the startup interface for 10 seconds. UTS40 and UTS62 have the same interface.
5.1
IDLE
After the startup sequence is complete, the LCD shows the idle interface.Vended and on-premise shown.
5.2
AUTOMATIC RUNNING
5.2.1 Start Automatic Running
On the controller, choose your desired wash temperature, Insert coins (vended model), and then press [Start] button to start
the program.
5.2.2 Check Running Status Message
Press [Up] and [Down] for 3 seconds to exit the "running" or "Idle" menu. Your password is required to access the run status
menu.
Press [Esc] to return to the "running" or "Idle" menu.
5.2.3 Ending Automatic Running
After completing the cycle, the controller enters the end status mode. The controller beeps to inform the user that the wash
cycle has completed. The buzzer can be cancelled by pressing [Start] button.
26
Part. 14000001 Rev. 04//2021
Unity UTS40
Wash Temp: Cold
$:
3.00
Paid: 0.00
Auto Stand. Cold
00:32:31
Pre Wash...
Function Menu
Running Information
Error Check
<Esc>3S=Quit
X1LD041AX17001-1
.V100A00
X1LL020AX26001-1
.V100A00
4
Wash Temp: Cold
FREE MODE
Lev :
0/ 20cm
Lev:
0/10cm
Temp: 22/40°C
Speed: 50/50RPM
Stand, Cold, Hot
®/™ ©2021 Unity Laundry Systems. All rights reserved.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the UTS40 and is the answer not in the manual?
Questions and answers
door pin error no 6
Door Pin Error No. 6 for UNITY LAUNDRY SYSTEMS UTS40 means there is an issue with the door pin or the lock release cord. It is recommended to check these components to resolve the error.
This answer is automatically generated