Elba EDCH-K3012ST Owner's Manual page 16

4. Touching the timer control again, the first digit will flash and ready to set the timer.
Set the timer setting by touching "+" button (For Sensor Touch Model) / sliding the
5.
controls to right (For Sliding Touch model). Now the timer will appear from 05
minutes become 95 minutes.
6. When the time is set, it will begin to countdown immediately. The display will show
the remaining time.
Buzzer will beep for 30 seconds and the timer indicator shows "- -" when the setting
7.
time finished.
Setting the timer to switch off one or more cooking zones
If you are selected any cooking zone
1. Touching the heating zone selection control that you want to set the timer.
Touch the timer control, "00" will show in the timer display. "0" will flash and ready to
2.
set the timer.
16