Ce Marking On Power Drive Systems (Pds) - Siemens SINAMICS PERFECT HARMONY GH180 Operating Instructions Manual

C.3

CE Marking on Power Drive Systems (PDS)

The terminology used throughout IEC and EN standards relating to electrical VFDs is contained
in the IEC 61800 series of standards. The IEC 61800 series of standards references other
components of the PDS with respect to the VFD; however, those components are covered by
different IEC product relevant materials.
Note
As referenced in the figure 1 of the IEC 61800-5-1 and figure 2 of IEC 61800-2 installation, the
motor or any machinery, including gearboxes and the driven equipment, are outside of the
scope of Siemens LD's responsibility.
Siemens Industry, Inc. I DT LD SINAMICS Perfect Harmony™ GH180 designs always include the
Basic Drive Module (BDM) that includes a SINAMICS Perfect Harmony™ transformer, converter/
inverter (power cell) section, and control section. Depending on the Siemens Industry, Inc.
scope of supply (buyout), SINAMICS Perfect Harmony™ GH180 Complete Drive Module (CDM)
may include optional components, such as a motor excitation unit, output line filter, output line
reactor, or earthing switches.
Type 6SR5 Air-Cooled
Operating Instructions, AK, A5E39390112
C.3 CE Marking on Power Drive Systems (PDS)
Quality
119