Table of Contents
Advertisement
When ready to fly, first extend
the transmitter aerial.
OFF - ON
OFF - ON
Switch on the transmitter.
OFF - ON
Switch on the receiver.
Check
that
the
wings
correctly fitted to the fuselage.
I/C FLYING GUIDELINES
Operate the control sticks on the
transmitter and check that the
control surfaces move freely and in
the CORRECT directions.
Check that the transmitter batteries
have adequate power.
ALWAYS
take off into the wind.
If the model does not respond
are
correctly to the controls, land it
as soon as possible and correct
the fault.
ALWAYS land the model INTO
the wind, this ensures that the
model lands at the slowest possible
speed.
OFF - ON
Switch off the receiver.
OFF - ON
OFF - ON
Switch off the transmitter.
Empty the fuel tank after flying, fuel
left in
the
tank
can
corrosion
and lead to engine
problems.
Made in Vietnam
cause
Advertisement
Table of Contents
