Table of Contents
Advertisement
To Go Online
Connect your Remote Module to your Office Module:
1.
Press PRV key until you return to the Go Online prompt, the press OK to initiate the connection.
2.
The Office phone number is dialed, and the modules connect. If passwords are enabled then you will be
prompted for a password. Enter the password and press RLS key.
You are now connected to the PBX, and can use your remote phone as if your were in the office.
To go Offline (Disconnect)
Disconnect the Remote Module from the Office Module:
1.
Access the Online Menu by pressing the press the HOLD key four times quickly when on-hook. The
Disconnect menu selection will appear.
2.
To disconnect, press OK to initiate the disconnection.
3.
To reconnect, first press NEXT and then OK.
4.
To access additional Online menus press NEXT again.
If you encounter any error messages while operating the EXTender 3000s, please refer to the Error
Messages section in System Administrator's Guide Troubleshooting section for a detailed description of
suggested actions to take.
EXTender 3000 Quick Installation Guide
Norstar/Meridian - Configuring the Remote Module
Page 33
Advertisement
Table of Contents
