Raider RDP-DG01 User Manual page 10

10 www.raider.bg
EN
Congratulations for the purchase of hammer drill from the successfully growing brands - RAIDER. As being properly
installed and operated, RAIDER are safe and reliable machines, and work with them will bring a real pleasure. For your
convenience has been built an excellent service network of 45 service stations across the country.
Before using this hammer drill please carefully acquaint to these "instructions for use".
In interest of your safety and to ensure proper use, read these instructions carefully, including the recommendations
and warnings in them. To avoid unnecessary errors and accidents, it is important that these instructions must remain
available for future reference to all who will use the machine. If you sell it to a new owner "Instructions for Use" must
be submitted along with it, so that new owner can meet with the relevant safety measures and operating instructions.
EUROMASTER Import Export Ltd. is an authorized representative of the manufacturer and owner of the trademark
RAIDER.
Adress: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10, www.raider.bg; www.
euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of certification:
Trade, import, export and servicing of hobby and professional electrical, mechanical and pneumatic tools and general
hardware. The certificate was issued by Moody International Certification Ltd, England.
Parameter
Model
Nominal supply voltage:
AC Frequency:
Rated power
Velocidade sem carga
Diâmetro do collet
Aula de proteção
ISO 11680-1: LpA=89 dB(A), LwA=100 dB(A); K=3 dB(A); ah=2.732 m/s
ORIGINAL INSTRUCTION MANUAL
Dear Customer,
Technical Data
Unit
RDP-DG01
-
V AC
Hz
W
min
-1
mm
-
2
K = 1.5 m/s
Value
230
50
500
28000
6
II
2