Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
defined by a preset to another, without showing the middle areas between these two, to
ensure the surveillance efficiency. It can also reduce the use of bandwidth in a digital
network system.
Preset freezing function is invalid when you calling a pattern.
Preset Speed: You can set the speed of a defined preset from 1 to 8.
Manual Control Speed: The manual control speed can be set as Compatible, Pedestrian,
Non-motor Vehicle, Motor Vehicle or Auto.
Compatible: The control speed is same as the Keyboard Control Speed.
Pedestrian: Choose the Pedestrian when you monitor the pedestrians.
Non-motor Vehicle: Choose the Non-motor Vehicle when you monitor the non-motor
vehicles.
Motor Vehicle: Choose the Motor Vehicle when you monitor the motor vehicles.
Auto: You are recommended to set it as Auto when the application scene of the
Explosion-Proof PTZ Camera is complicated.
Keyboard Control Speed: Define the speed of PTZ control by a keyboard as Low, Medium
or High.
Auto Scan Speed: The scan speed can be set from level 1 to 40.
ax. Tilt-angle: Set the tilt-angle of the Explosion-Proof PTZ Camera from the dropdown
M
list.
Zooming Speed: The zoom speed is adjustable from level 1 to 3.
PTZ OSD: Set the on-screen display duration of the PTZ status.
Zoom Status: Set the OSD duration of zooming status as 2 seconds, 5 seconds, 10
seconds, NC (Normally Closed), or NO (Normally Open).
PT Status: Set the azimuth angle display duration while panning and tilting as 2 seconds,
5 seconds, 10 seconds, NC (Normally Closed), or NO (Normally Open).
Preset Status: Set the preset name display duration while calling the preset as 2 seconds,
5 seconds, 10 seconds, NC (Normally Closed), or NO (Normally Open).
Power-off Memory: The Explosion-Proof PTZ Camera can resume its previous PTZ status or
actions after it restarted from a power-off. You can set the time point of which the
Explosion-Proof PTZ Camera resumes its PTZ status. You can set it to resume the status of 30
seconds, 60 seconds, 300 seconds or 600 seconds before power-off.
3. Click
5.4.2 Configuring PTZ Limits
Purpose:
The Explosion-Proof PTZ Camera can be programmed to move within the configurable PTZ limits
(left/right, up/down).
Steps:
1.
Enter the Limit configuration interface:
to save the settings.
54
Advertisement
Table of Contents
