Display Info. On Stream; Configuring Image Settings; Configuring Display Settings - Honeywell HEIPTZ-2736-WI User Manual

User Manual of Explosion-Proof PTZ Camera
PTZ Camera models
4. Select the Region No. from the dropdown list.
5. Adjust the ROI level from 1 to 6. The higher the value, the better image quality in the red
frame.
6. Enter a Region Name.

ROI for Dynamic Region
1. Check Enable Face Tracking checkbox to enable face tracking, and the captured face picture
is set as region of interest. Adjust the ROI level from 1 to 6.
2. Check Enable Target Tracking checkbox to enable target tracking, and the target is set as
region of interest. Adjust the ROI level from 1 to 6.
3. Click

6.2.4 Display Info. on Stream

Check the Enable Dual-VCA checkbox, and the information of the objects will be marked in the
video stream. Then, you can set rules on the connected rear-end device to detect the events
including line crossing, intrusion, etc.

6.3 Configuring Image Settings


On the event configuration page, click

Click the direction buttons to control the pan/tilt movements.

Click the zoom/iris/focus buttons to realize lens control.

The functions vary depending on different Explosion-Proof PTZ Camera models.

6.3.1 Configuring Display Settings

Purpose:
Configure the image adjustment, exposure settings, day/night switch, backlight settings, white
balance, image enhancement, video adjustment, and other parameters in display settings.

The parameters in Display Settings interface vary depending on different Explosion-Proof
PTZ Camera models.

You can double click the live view to enter full screen mode and double click it again to exit.
Steps:
1. Enter the Display Settings interface:
Configuration > Image> Display Settings
to save the settings.
to show the PTZ control panel or click
81
to hide it.