Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
NTP Port: Port of NTP server.
Interval: The time interval between the two synchronizing actions by NTP server. It can be
set from 1 to 10080 minutes.
You can click
to make sure that the NTP server is connected.
If the Explosion-Proof PTZ Camera is connected to a public network, you should use a NTP
server that has a time synchronization function, such as the server at the National Time
Center (IP Address: 210.72.145.44). If the Explosion-Proof PTZ Camera is set in a customized
network, NTP software can be used to establish a NTP server for time synchronization.
Configuring Time Synchronization Manually
Steps:
(1) Check the Manual Time Sync radio button.
(2) Click
to set the system time from the pop-up calendar.
(3) Click
You can also check the Sync with local time checkbox to synchronize the time of the
Explosion-Proof PTZ Camera with the time of your computer.
Select the Time Zone
Purpose:
When the Explosion-Proof PTZ Camera is taken to another time zone, you can use the Time Zone
Figure 6-43 Time Sync by NTP Server
to save the settings.
Figure 6-44 Time Sync Manually
92
Advertisement
Table of Contents
