Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
Configuration > System > Maintenance > Upgrade & Maintenance
2.
Click Browse to select the saved configuration file.
3.
Input the encryption password you have set when exporting the configuration file.
4.
Click Import to import configuration file.
You need to reboot the Explosion-Proof PTZ Camera after importing configuration file.
Upgrading the System
Steps:
1.
Enter the Maintenance interface:
Configuration >System > Maintenance > Upgrade & Maintenance
2.
Select Firmware or Firmware Directory.
Firmware: when you select Firmware, you need to find the firmware in your computer
to upgrade the device.
Firmware Directory: You need to find the directory where the firmware locates. The
device can find the firmware in the directory automatically.
3.
Click Browse to select the local upgrade file and then click Upgrade to start remote upgrade.
The upgrading process will take 1 to 10 minutes. Don't disconnect power of the
Explosion-Proof PTZ Camera during the process. The Explosion-Proof PTZ Camera reboots
automatically after upgrading.
Log Searching
Purpose:
The operation, alarm, exception and information of the Explosion-Proof PTZ Camera can be
stored in log files. You can also export the log files on your demand.
Before you start:
Configure network storage for the Explosion-Proof PTZ Camera or insert a memory card in the
Explosion-Proof PTZ Camera.
Steps:
1. Enter the Log interface:
Configuration >System > Maintenance > Log
96
Advertisement
Table of Contents
