Table of Contents
Advertisement
User Manual of Explosion-Proof PTZ Camera
function to adjust the time. The time will be adjusted according to the original time and the time
difference between the two time zones.
From the Time Zone dropdown menu as shown in Figure 6-45, select the Time Zone in which the
Explosion-Proof PTZ Camera locates.
Configuring DST (Daylight Saving Time)
Purpose:
Daylight Saving Time (DST) is a way of making better use of the natural daylight by setting your
clock forward one hour during the summer months, and back again in the fall.
If there is the habit of adjusting clocks forward in your country in certain time period of a year,
you can turn this function on. The time will be adjusted automatically when the Daylight Saving
Time (DST) comes.
Steps:
1. Enter the DST interface by Configuration > Advanced Configuration > System > DST
2. Check the Enable DST checkbox to enable the DST function.
3. Set the date of the DST period.
4. Click
Configuring RS-232
The RS-232 port can be used in two ways:
Parameters Configuration: Connect a computer to the Explosion-Proof PTZ Camera through
the serial port. Device parameters can be configured by using software such as
HyperTerminal. The serial port parameters must be the same as the serial port parameters
of the Explosion-Proof PTZ Camera.
Transparent channel: Connect a serial device directly to the Explosion-Proof PTZ Camera.
The serial device will be controlled remotely by the computer through the network.
RS-232 function varies depending on different Explosion-Proof PTZ Camera models.
Steps:
1. Enter RS-232 Port setting interface:
Figure 6-45 Time Zone Settings
Figure 6-46 DST Settings
to save the settings.
93
Advertisement
Table of Contents
