4/30
Bosch Rexroth AG
Introduction
1
Introduction
This manual deals with the instructions relative to servicing and
maintenance operations for the SM 12 control blocks. For the inspections
and servicing operations associated with the hydraulic system of the
machine to which the block is connected, please consult the maintenance
manual supplied by the equipment manufacturer.
It is recommended that only qualified personnel perform the installation,
connection and maintenance of this device, and that all operations be
carried out in compliance with the technical standards in force and the
cleanliness regulations specific to this type of installation.
To ensure maximum performance and safety during maintenance
operations we advise you to READ THIS MANUAL THOROUGHLY.
All information, illustrations, instructions and characteristics contained in
this document are based on the latest product information available at
the time of publication. In its attempts to maintain a high-quality product,
BOSCH REXROTH reserves the right to make design or technical
modifications at any time and without prior notification.
Related documents
SM 12 is a system component.
•
Also follow the instructions for the other system components.
•
Also follow the instructions in the following manuals:
–
System documentation from the system manufacturer
–
Service instruction manual RE64025
–
Datasheet RE64122
–
Spare parts manual RDEF64122-E
Type SM 12 | RE 64122-S/06.2011